Chromeweld 600 Wear Plate Delivers Durability Performance Advantage

JADCO is the preferred supplier for many Original Equipment Manufacturers looking to increase their wear plate equipment life for their customers. Non-Disclosure Agreements are standard procedure with our OEM customers.


What components are your customers looking to last longer? When your customers demand longer life, if you don’t give them an option; they will look elsewhere. Working with JADCO to provide longer wear plate life keeps your customers happy and loyal.

During a trade show recently, we spoke with one of our OEM customers. The general manager approached our display and told us JADCO Chromeweld 600 chrome carbide overlay plate made a huge improvement in the performance of their equipment.

Click below to listen to another satisfied JADCO customer.

Here is the audio recording with the text listed below in bold italics.


“We were taking about how JADCO material improved the durability of our equipment.

We’ve been making air separating equipment for 5 to 10 years now. We have probably built maybe 200 units in the US.
One of the challenges we have always had is that the operators like to operate at a little faster speed than they should, and that increases the wear. So wear life became an issue.

We started off doing AR400 and started doing as thick as we could and still be able to bend it. We topped out at that point, and really the next level was going to ceramics. That was cost prohibitive to most of our customers.

So taking the JADCO product and doing all the surface treatment and everything else on it, significantly increased our wear life without having to significantly increase our price.

And that was the Chromeweld 600?
Right, yup.


And the other thing is the value added. First we started off sending you parts and having you coat it. Then we found out you actually fabricate the parts. So you have been fabricating the parts and coating them for cheaper than we can do it separately, and that again was a huge value added.”

Isn't it time for you to step up to the performance of Chromeweld family of products?

JADCO’s entire Chromeweld family of Chrome Carbide Overlay products is only made at our headquarters in Harmony, PA; 30 minutes North of Pittsburgh.

As the USA leading manufacturer of CCO plate, you can depend on every wear resistant product you get from JADCO.

Many steel distributors buy foreign CCO for the lowest price having very little carbide content, and even less quality control.


To make certain we control every aspect of our Chromeweld overlay plate, JADCO has created our own clad machines.

For the last 40 years we have focused exclusively on delivering consistent, longer life for our customers.

Now you understand why JADCO delivers better results for our customers. We think differently by focusing only on your results.

Allow us to help you today by calling (724) 452-5252, or email

We will schedule a meeting with one of our local wear plate specialists at a time that best fits your schedule.

Remember, the only thing you have to lose by not working with JADCO, are your profits.

When your usual wear plate gives out, give JADCO a shout! (724) 452-5252