Blog

Mar 24

Fast And Easy Wear Protection With HardGuard Blocks

Excavator Buckets , Wear Plate Wednesday, Crusher Spider Arm Guards , Dredging Equipment , How To Weld HardGuard , How To Form HardGuard, wear protection, Wear Plate Wednesday, Chutes, Loader Buckets , Chocky blocks , Rock Boxes , Hard Guard, chrome cast white iron wear blocks , Sugarcane Knife Edges, HardGuard, Chocky bars , Shovel Buckets , Dragline Buckets

JADCO HardGuard blocks are easy to install, and provide instant wear protection in a wide range of exposed wear locations.

There is no more effective quick fix available.

Chocky blocks are a common term for these high Chrome cast white iron wear blocks. Cost effective and available in a wide variety of sizes and shapes to protect vulnerable areas, when moving material.

With a minimum of 63 HRC, this alloy delivers maximum abrasion protection. The mild steel backing plate bonded onto the high Chrome wear material allows you to easily weld them onto your equipment without the need for specialized welding alloys.


Click Here to see our video How To Weld HardGuard

Click Here to see our video How To Form HardGuard

HardGuard blocks are perfect for a variety of difficult applications such as:
• Chutes
• Crusher Spider Arm Guards
• Dragline Buckets
• Dredging Equipment
• Excavator Buckets
• Loader Buckets
• Rock Boxes
• Shovel Buckets
• Sugarcane Knife Edges
• Anywhere With Extreme Abrasive Wear


Size chart for HardGuard Blocks:

temp-post-image

Determine your part number shown in the following size graph.

temp-post-image

THE ITEMS HIGHLIGHTED IN RED ARE IN STOCK FOR QUICK SHIPMENT.

These HardGuard blocks are able to be formed for inside and outside curves as shown below:

temp-post-image

WELDING, CUTTING AND FORMING INSTRUCTIONS

To protect your mounting bolts on cutting edges, we offer HardGuard Buttons and Donuts.
temp-post-image

To protect your mounting bolts on cutting edges, we offer HardGuard Donuts and Buttons.

Simply measure the OD of your socket used to tighten the mounting nuts, and compare the ID of the Donut to determine the size you need. The ID is shown as ‘B’ in the top graph of the following chart.
temp-post-image

Donuts protect mounting bolts and nuts from wear. Buttons are great for skid pads. All are in stock and ready to ship.

JADCO HardGuard Roll Bars are ideal for protecting bucket uprights and target wear areas.

temp-post-image

Round roll bars sizes are ready to ship

Inexpensive and easy to install allow you to protect your equipment from from abrasion and impact wear.

You don’t have to wait for the next Wear Plate Wednesday blog post to address your specific wear challenges.

Allow us to assist you by calling (724) 452-5252, or email sales@jadcomfg.com today. We will schedule a meeting at a time that best fits your schedule requirements, with one of our local wear plate specialists.

Together we will assist you to achieve far better results in your wear plate applications than you have experienced before.

The only thing you have to lose by not working with JADCO, are your profits. And eliminate another stress headache.

Remember, when your wear plate gives out, give JADCO a shout!

Posted on 03/24/2020 at 10:00 PM

^